System Includes: - Outdoor Condenser: UMAT30HP230V1AO
- Indoor Air Handler: UMAT30HP230V1AC
- Grill for Air Handler: UMAT30GRILLE
- Remote Controller: Handheld IR (Optional XK-60 Wall Mount Controller, SKU: 30294000007, must be ordered separately)
- Required for install, but not included: 3/8" x 5/8" line set
The GREE U-Match UMAT30HP230V1AC-S is an 28,200 BTU ceiling cassette ductless mini split heat pump system. It is an energy efficient 16 SEER system, and the ceiling cassette design will add inconspicuous climate control to any room.Each ceiling cassette can be operated by infrared wireless remote control or wired controller mounted to the wall. Just like a wall-mounted ductless split, the air handler is connected to the outdoor condenser via a line set.This system uses a
3/8" x 5/8" line set and has a maximum line run of 98'.
Features & Benefits: - High Efficiency G10 Inverter Engineering Technology
- 4-way discharge air
- Quiet operation sound pressure level at 56db (outdoor), down to 37db (indoor)
- Cleanable air filter
- Power failure recovery
- Internal condensate drain pump
- Low ambient cooling (5 deg F)
- Eco-friendly R410A refrigerant
- Attractive, decorative grille cover
- Sentry float switch in air handler
How many BTUs do I need for my ductless split?Please Note: Mini Split Systems must be installed by a licensed Contractor with an EPA Refrigerant Certification to qualify for warranty. (BTU ratings are estimates only, based on 10ft ceilings, with great insulation and windows. Some factors may alter this calculation: lack of insulation, heavy sun, excessively hot regions, & tall ceilings)
9,000 BTU 250-350 sqft
12,000 BTU 350-500 sqft
18,000 BTU 500-750 sqft
24,000 BTU 750-1000 sqft
30,000 BTU 1000-1250 sqft
Make sure you install a unit that is going to properly cool your square footage. An over-sized air conditioner is actually less effective and wastes energy at the same time. Air conditioners remove both heat and humidity from the air. If the unit is too large, it will cool the room quickly, but only remove some of the humidity. This leaves the room with a damp, clammy feeling. A properly sized unit will remove humidity effectively as it cools.
Which line set kit do I need?This system uses a 3/8" x 5/8" line set. These are sold separately, and you can choose from various lengths of line: 15', 25' and 50'. The length needed depends on the needs of your project and how you will set up the system (distance from outdoor condenser to indoor air handler).
Is this backed by a warranty?Yes, it comes fully backed by a manufacturer's warranty. Please be aware that only systems that are installed by a licensed HVAC contractor are backed by the warranty. Proof of licensed installation is required. The receipt/invoice from the contractor should be sufficient.